Superlative Arms .750″ Adjustable Gas Block, Bleed Off – Clamp On – Melonite Finish
SKU # SABO-DI-750SM
The Superlative Arms Patented “Bleed Off”, direct impingement, gas block for the AR-15/AR-10/LR-308 platform adjusts the gas flow by bleeding the gas out of the front of the block instead of restricting the flow like conventional adjustable blocks.
Results:
The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas / pressure are bled out of the block allowing the system to run much cleaner and cooler.
Reduction of felt recoil.
Patented adjustment detent is located outside of the block and therefore no contamination.
The gas adjustment screw does not restrict the gas flow; therefore there is no erosion or seizing of the screw / no loss of detent due to carbon build up. Although it is removable, we have added a safety mechanism, which stops you from unintentionally backing the screw all the way out.
When using SBR’s and / or suppressors the bleed off port allows the excessive pressure to be exhausted out of the block reducing blow back.
Data:
Gas Block Material: 416 SS
Finish: Melonite, QPQ
Barrel Diameter: 0.750″
Weight: 1.68 oz.
Length: 1.00″
Attachment Type: Solid
Gas Adjustment: (Patented) 30 locked positions, front of block
Bleed Off Port: (Patented) Front of block which vents forward away from operator
Included:
Gas Block – Assembled
(2) 10-32 x 1/4″ Set Screws
(1) Gas Tube Roll Pin
(1) 3/32 x 6″ L-Shaped Hex Key, Ball-end / Torx T-15 Tool
(1) Instructions for installation and setup
SKU # SABO-DI-750CM
The Superlative Arms Patented “Bleed Off”, direct impingement, gas block for the AR-15/AR-10/LR-308 platform adjusts the gas flow by bleeding the gas out of the front of the block instead of restricting the flow like conventional adjustable blocks.
Results:
The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas and pressure are bled out of the block allowing the system to run much cleaner and cooler.
Reduction of wear on the bolt carrier group components.
Reduction of felt recoil allowing for faster follow-up shots.
Patented adjustment detent is located outside of the block and therefore no contamination.
In bleed off mode the gas adjustment screw does not restrict the gas flow; therefore, there is no erosion or seizing of the screw, and no loss of detent due to carbon build up. Although it is removable, we have added a safety mechanism, which stops you from unintentionally backing the screw all the way out.
When using SBR’s and/or suppressors the bleed off port allows the excessive pressure to be exhausted out of the block reducing blow back.
Data:
Gas Block Material: 416 SS
Finish: Melonite, QPQ
Barrel Diameter: 0.750″
Weight: 1.68 oz.
Length: 1.00″
Attachment Type: Clamp On
Gas Adjustment: (Patented) 30 locked positions, front of block
Bleed Off Port: (Patented) Front of block which vents forward away from operator
Included:
Gas Block – Assembled
(2) 6-32 x 3/8″ Torx T-15 cap screws
(1) Gas Tube Roll Pin
(1) 3/32 x 6″ L-Shaped Hex Key, Ball-end / Torx T-15 Tool
(1) Instructions for installation and setup
adj. gas block NOTE FROM CURTIS- These gas blocks are cut from a different cloth. These are great gas blocks for those wanting to shoot suppressed. The bleed off feature helps reduce gas pressure blow back. This listing contains 750 gas block and 625 gas block. Please make fill in all drop down boxes before checkout. Inventory is real time. Thank you! Looking for stainless steel finish? Follow the link below. Superlative Arms .750″ Adjustable Gas Block, Bleed Off – Solid, Stainless Steel, Matte Finish – Premium Outfitters USA %
Jesse ketcham –
There are awesome.
302visuals –
One of the best AGB’s on the market.
Taylor Epp –
Bought this on a whim and ended up loving it.